|

Feedback on Aqua-PHOS Fe:
"... after allowing my
PO4 to rise ridiculously out of control I'm finally getting on
top of it. A lot of Aquaphos FE with an incredibly slow flow
rate has done what Rowa couldn't... as a consequence I've got
colours appearing in some of the SPS I haven't seen in a long
time."
"I now use Aquaphos FE which I rate as excellent. In my
experiance it works just as effectively as Rowa and is a lot
cheaper"
"I would recommend Aquaphos FE. Rowaphos is very expensive IMO
and Aquaphos doesnt clump with slower flow giving better contact
time and is cheaper!"
|
|
Description
Excessive levels of phosphate can encourage nuisance algae
that look unsightly and can inhibit growth of other plants or
corals.
Aqua-PHOS
Fe™
is
an iron oxide-hydroxide media
that attracts and binds phosphates to its surface, removing them
from the water. The small granules and porous inner grain
structure provide a very large surface area of 250-270m²
per gram, enabling
Aqua-PHOS
Fe™
to bind up to 22 grams of phosphate-PO4 per
kg, which compares very favourably with other brands costing a
lot more!
Aqua-PHOS Fe™
is suitable for both freshwater and saltwater aquarium use.
Guidance
Rinse the granules in pure water before use.
Freshwater & Ponds - we suggest using
50ml-75ml of media per 100 litres of water, with
the amount varying according to the pollution load.
Aim to keep phosphate levels below 0.1ppm.
Saltwater - we suggest using 100-150ml of
media per 100 litres of aquarium water, depending on the pollution load. Aim to
keep phosphate levels below 0.03ppm.
In both cases the media is best used by running a VERY SLOW
flow of aquarium water through it. The media's
effectiveness is driven by its contact time with the aquarium
water. The longer the contact time the more effectively the
media works. So we recommend a very slow flow of no more
than 10 litres per hour per litre of media - ideally only 1-2
litres per hour! Fluidising or running an excessive flow
through the media can degrade the media and reduce its
effectiveness. Monitor phosphate
levels and replace the media if levels start to rise.
Click the information button below to download further advice
and tips on getting the best out of your
Aqua-PHOS Fe™
media [pdf file].
|